USED Trijicon RMRcc Pistol Adapter Mount Plate Review

Is the USED Trijicon RMRcc Pistol Adapter Mount Plate, – 1 out of 12 models All Talk?

The USED Trijicon RMRcc Pistol Adapter Mount Plate, – 1 out of 12 models promises to offer a streamlined and secure mounting solution for the popular RMRcc red dot sight on Smith & Wesson M&P C.O.R.E. pistols. But in the world of optics mounting, where tolerances matter in thousandths of an inch, does a used plate still deliver the performance and reliability we demand? I was skeptical, to say the least.

For years, I’ve relied on professionally milled slides or brand-new adapter plates to ensure a rock-solid optic setup for my pistols. I needed a solution for a new-to-me M&P C.O.R.E. pistol I acquired through a trade; I wanted to mount an RMRcc I already owned, but didn’t want to spend a fortune on a custom milling job. The allure of saving money with a used plate was strong, but would it be worth the risk?

Upon receiving the adapter plate, my initial inspection revealed a steel construction that felt reassuringly solid. Weighing in at a mere 32 grams, it didn’t appear to add significant bulk to the slide. Compared to some of the thicker aluminum plates I’ve seen, this one seemed promising.

I considered several options, including purchasing a new Trijicon adapter plate or exploring other aftermarket brands. Ultimately, the combination of the lower price point of this used option and the Trijicon name swayed my decision. My first impression was cautiously optimistic, tinged with the lingering question of whether a used plate could truly provide the zero retention and durability I require.

Real-World Testing: Putting USED Trijicon RMRcc Pistol Adapter Mount Plate, – 1 out of 12 models to the Test

First Use Experience

My first experience with the USED Trijicon RMRcc Pistol Adapter Mount Plate, – 1 out of 12 models took place at my local shooting range. I wanted a controlled environment to gauge the plate’s initial performance and ensure the RMRcc was securely mounted. The weather was fair, dry with a slight breeze, perfect for accurate shooting.

Installation was straightforward, utilizing the Smith & Wesson supplied fasteners to attach the plate to the C.O.R.E. slide, followed by the Trijicon supplied screws for the RMRcc itself. I experienced no immediate issues; everything seemed to align correctly. After about 100 rounds of 9mm, I checked the screws and found them to be holding tight; no loosening was apparent.

Extended Use & Reliability

After several weeks and a few hundred rounds, the USED Trijicon RMRcc Pistol Adapter Mount Plate, – 1 out of 12 models has held up surprisingly well. I’ve carried the pistol during several range trips and even incorporated it into some light drills. While I haven’t subjected it to extreme abuse, it has proven reliable under normal shooting conditions.

There are a few minor signs of wear, primarily some slight scratches on the finish from holster use and handling. Maintenance involves only a quick wipe-down with a lightly oiled cloth after each range session, ensuring no corrosion develops. Compared to my usual milled slide setups, the performance is surprisingly close; though the used nature makes me check screw torque more frequently.

Breaking Down the Features of USED Trijicon RMRcc Pistol Adapter Mount Plate, – 1 out of 12 models

Specifications

• The USED Trijicon RMRcc Pistol Adapter Mount Plate, – 1 out of 12 models is specifically designed for Smith & Wesson M&P C.O.R.E. pistols. This compatibility ensures a proper fit and alignment for the Trijicon RMRcc red dot sight.
• Constructed from steel, the adapter plate offers increased durability compared to aluminum alternatives. This steel construction helps to withstand the recoil and stresses of repeated firing.
• Weighing in at approximately 32 grams (0.1 lbs), the plate adds minimal weight to the pistol. This lightweight design prevents unnecessary bulk and maintains the pistol’s balance.
• The plate’s dimensions are approximately 1.8 inches in length, 0.9 inches in width, and 0.1 inches in thickness. These compact dimensions ensure a low profile and minimal obstruction of the sight picture.

Performance & Functionality

The USED Trijicon RMRcc Pistol Adapter Mount Plate, – 1 out of 12 models performs its primary function of securely mounting an RMRcc to an M&P C.O.R.E. slide quite effectively. I experienced no issues with the sight shifting or losing zero during normal use. The plate allows for a co-witness with suppressor height sights, which provides a backup aiming solution in case the red dot fails.

The only significant weakness is the unknown history of the used plate. There’s always a risk of unseen damage or wear that could compromise its performance over time. Despite these concerns, it has met my expectations and allowed me to utilize my RMRcc on the M&P C.O.R.E. pistol without incurring the cost of custom slide work.

Design & Ergonomics

The adapter plate’s design is simple and functional. It prioritizes a secure fit and low profile. The steel construction feels robust and inspires confidence in its ability to withstand the rigors of regular use.

There’s virtually no learning curve involved in using the plate. It’s a straightforward installation process that requires only basic tools and a bit of mechanical aptitude. Once installed, it integrates seamlessly with the pistol, adding minimal bulk or obstruction.

Durability & Maintenance

Given that it is a used item, predicting its long-term durability is difficult. However, the steel construction suggests it should withstand considerable use before needing replacement. I expect it to last for several years with proper care and maintenance.

Maintenance is simple, requiring only occasional cleaning and inspection of the mounting screws. Regular lubrication of the screws can also help prevent corrosion and ensure they remain securely fastened.

Accessories and Customization Options

The USED Trijicon RMRcc Pistol Adapter Mount Plate, – 1 out of 12 models comes with only the adapter plate itself. Users will need to provide their own Smith & Wesson C.O.R.E. mounting screws, as well as the Trijicon RMRcc mounting screws. No other customization options are directly available for the plate.

The plate’s primary function is to facilitate the mounting of a Trijicon RMRcc. The main customization stems from the user’s choice of RMRcc model and any associated accessories like lens protectors or backup iron sights. Due to the nature of this plate being designed specifically for Smith & Wesson M&P C.O.R.E. pistols and the Trijicon RMRcc, it is not compatible with other red dot sights without using an additional adapter plate.

Pros and Cons of USED Trijicon RMRcc Pistol Adapter Mount Plate, – 1 out of 12 models

Who Should Buy USED Trijicon RMRcc Pistol Adapter Mount Plate, – 1 out of 12 models?

This used adapter plate is perfect for budget-conscious shooters who own a Smith & Wesson M&P C.O.R.E. pistol and want to mount a Trijicon RMRcc without the expense of custom slide work. It’s also a good option for those who want to experiment with a red dot sight on their pistol before committing to a more permanent solution.

Those who prioritize absolute certainty in their equipment’s condition and reliability should probably skip this product and opt for a new adapter plate or custom slide milling. Individuals who frequently subject their firearms to extreme conditions might also benefit from the added durability of a brand-new, high-end mounting solution. A must-have accessory would be a high-quality torque wrench to ensure proper screw tension during installation and maintenance.

Conclusion on USED Trijicon RMRcc Pistol Adapter Mount Plate, – 1 out of 12 models

The USED Trijicon RMRcc Pistol Adapter Mount Plate, – 1 out of 12 models is a surprisingly viable option for mounting a Trijicon RMRcc on a Smith & Wesson M&P C.O.R.E. pistol, especially for those on a budget. While the unknown history introduces a degree of risk, the steel construction and ease of installation make it a compelling alternative to more expensive solutions.

The price is definitely justified, considering the potential savings compared to custom slide milling or purchasing a new plate. I would personally recommend it to anyone looking for an affordable and functional way to add a red dot sight to their M&P C.O.R.E. pistol. Just be sure to inspect it carefully upon arrival and diligently monitor the screw torque during use. If you’re comfortable with a little bit of risk, you can save a considerable amount of money. Give it a shot – you might be pleasantly surprised!