When I need to see that elk or deer more closely, I reach for my Vortex binoculars. Why? Because I’ve come to trust the brand over the years for its superb optics and performance — and the fact their customer service is outstanding.
So, when it came time to outfit the new Springfield Armory 1911 Operator AOS with a red-dot optic, going with Vortex was a no-brainer. The only challenge was deciding which specific model from their wide selection of options. The Defender red dot sight series made the best sense for me — and the Defender-ST is such a perfect fit, it almost seems custom-made for the gun.
Installing the Defender-ST
Vortex makes the installation process about as easy as it can be, and the optic features the DeltaPoint Pro footprint. They provide a number of screw sets, which are well-labeled to indicate the models of guns they fit. If your particular gun isn’t listed, they also have the full details on the size of the screws, including thread size, listed on the package. The screws are also pre-treated with thread lock. All the screws in the kit use a Torx #10 driver — keeping our lives simpler.
The battery compartment, which requires a CR2032 battery, is top-loading. This means that the battery can be changed without risk of losing your zero — or a screw in the dirt at the range. The battery compartment lid does require a special tool to screw/unscrew it, which is provided. The tool also has a handy Torx #10 driver on the opposite end. This is something you’ll want to keep in the range bag. Expected battery life is anywhere from 25,000 hours to 100,000 hours depending on brightness setting.
The Defender-ST is part of Vortex’s Defender Series of red-dot optics. The series consists of the CCW (small), ST (medium), and XL (large). For the 1911 Operator AOS, I think the ST is the perfect size. It’s large enough for fast acquisition and great downrange visibility, but doesn’t add any significant width to the 1911, and virtually no weight (when you factor in the absence of the cover plate).
Details on the Vortex Defender-ST Red Dot Sight
Let’s take a look at the key specs:
The Defender-ST is a 1X red-dot optic mainly intended for handgun use. The red dot is 3 MOA in size as tested (while a 6 MOA version is also available), with a total of 10 brightness settings, with the lowest two being night vision-compatible. Adjustments are made using the large soft-touch buttons on either side. There is good tactile feedback with each incremental change you make.
Windage adjustment maximum is 145 MOA, and max for elevation is 115 MOA. The window is 23mm wide by 20mm high, providing nice visibility to the target and what is around it. Red-dots are by nature, parallax free with unlimited eye relief. This provides ultimate flexibility on mounting positions and shooting styles.
Made of high-quality aluminum alloy with a rugged and aggressively textured face that can be used as a tactical contact point to run your slide, the Defender-ST is 1.83” long and weighs just 1.48 oz. I weighed the Defender-ST with the AOS plate and screws and noted a total of 2.7 oz. Just the cover plate and screws for the Operator AOS weigh 2.0 oz. This is a net gain of only 0.7 oz. when the optic is installed. The width at the rear narrow end of the Defender-ST is 1”, and that swells to just 1.2” at the wide end — a perfect fit on the 1911.
In addition to the aforementioned plethora of mounting screws, rubber cover, custom tool and picatinny mount, Vortex also provides the battery and a lens cloth. A full and comprehensive user manual is also in the box. Also in the box is the Vortex VIP Warranty that covers the Defender-ST for life. If you want to test your man card and set the manual aside, rest easy — using the Defender-ST is about as simple as it gets.
Hands-On with the Vortex Defender
There are only two operating controls on the unit. The two soft-touch buttons (one on each side) are designated with up and down arrows. The up-arrow button will power the unit on if it is off, and with each press will increment the reticle brightness by one factor. Likewise, the down-arrow button decreases the reticle brightness, and if held for five seconds will power the unit off. I really like the feel of the buttons and the feedback they provide. You’re not left guessing whether you actually made a change — there is a nice tactile response and muffled click to the control.
Like most modern red-dot optics, the Defender-ST uses motion sensing technology to turn the unit off after several minutes of inactivity to prolong battery life. When moved, it will automatically turn the reticle back on at the same brightness level last used. You can override this function by manually turning the optic off as described above. To turn it back on, press and hold either the up or down button.
What if you want the dot to stay on, but you don’t want the auto-shutoff feature active? This might be the case during a competition or a training class, etc., where you are worried that your fast draw might not leave enough time for the reticle to come on. In that case, you can disable the auto-shutoff feature by pressing and holding both the up and down buttons for three seconds.
Live The Armory Life. The latest content straight to your inbox plus an automatic entry to each of our monthly gun giveaways!
The only other controls on the Defender-ST are the adjustment turrets. The one on the top of the unit is used to change elevation and the one on the right side is for windage. Perhaps one of my favorite specs for the Defender series of optics is the adjustment increment. 1-click equals 1-MOA. Simple and straightforward!
Installation of the Defender-ST is easy and well documented in the manual. I installed the optic on the brand-new 1911 Operator AOS from Springfield, which comes equipped with top-quality adapter plates to fit most common brands to the pistol. As noted, the Vortex Defender-ST footprint is identical to the DeltaPoint Pro footprint — making compatibility easy.
So many different screws are provided by Vortex, I didn’t have much trouble finding the right ones to fit the application. I installed the Springfield Armory Agency Optic System (AOS) adapter plate and then the Defender-ST on that.
Vortex pre-coats the screws they provide with non-permanent thread lock compound, but because I mounted and dismounted the unit several times as part of my testing (I previously ran it through its paces on the Echelon), I made sure to torque the screws to 15 in-lbs. You can use 12 in-lbs. if you have fresh thread lock on them.
Range Time with the Pistol Optic
When I hit the range with the Operator AOS and Vortex Defender-ST, I took a few moments to get a rough zero (it was close from the factory, but needed some adjustment to match the iron sights). Primarily shooting steel plates of various sizes at 15 yards, I didn’t need great precision, but I knew I’d want to put a couple of groups on paper, so I adjusted as needed. Besides, “aim small, miss small” is still the best advice I know of.
The purpose of a red-dot optic is simple. Put a visible marker on the target that has been calibrated to be the point of bullet impact. But in reality, there are a number of factors that can enhance or detract from the shooting experience and even the quality of your shooting.
An obvious one would be the optic’s ability to hold its zero. After hundreds of rounds, the Defender-ST never waivered in that regard. Another important factor for me is the ability to make brightness adjustments between shots without much effort. The large and tactile buttons on the Defender-ST worked perfectly for this, allowing me to make those adjustments without ever taking my sight off the target.
Another important trait is the overall feel of the device and its usefulness as an integral part of the firearm-based system. Vortex’s Defender-ST goes above and beyond by providing an extreme texturing (I’d even call it checkering) on the front face of the optic. This allows you to quickly and easily use the optic as the grab point for running the slide — which I did almost exclusively — and also makes a fantastic tactical contact for one-handed operation of the gun. You can catch the face of the Defender-ST on a belt, boot heel or doorframe and run the slide. The top of the aluminum housing has a soft padded patch of rubber to help absorb shocks.
Final Thoughts on the Vortex Defender-ST Review
And last — but by no means least for me, is the ability of my optic to co-witness with my iron sights. This is an entry-level requirement for me. Optics can fail for any number of reasons, which can be as simple as a dead battery at the worst time, and if you can’t see your sights, you’re in trouble. The visibility of the iron sights of the Operator AOS was clear and perfect at all times. This is the product of a partnership between the gun and the depth of the optic cut — the sights installed — and the height of the optic itself. Another reason why I think the Operator AOS and Vortex Defender-ST are a perfect fit.
Editor’s Note: Please be sure to check out The Armory Life Forum, where you can comment about our daily articles, as well as just talk guns and gear. Click the “Go To Forum Thread” link below to jump in and discuss this article and much more!
Read the full article here
